Shanghai Godier Electronics Co., Ltd.
Main products:touch screen,el cap,LED watch,wireless card splitter,LED mini display
Products
Contact Us
  • Contact Person : Ms. Chou Shelly
  • Company Name : Shanghai Godier Electronics Co., Ltd.
  • Tel : 86-20-61139039
  • Fax : 86-20-61139239
  • Address : Guangdong,Guangzhou,RM2109 ,block B,LongDe Building ,No 371 tian he road ,guangzhou
  • Country/Region : China
  • Zip : 510620

Support encryptions of Viaccess VIA , Seca MG,Irdeto IR and Conax CX TV Cardsplitter

Support encryptions of Viaccess VIA , Seca MG,Irdeto IR and Conax CX TV Cardsplitter
Product Detailed
Support encryptions:Viaccess VIA , Seca MG,Irdeto IR and Conax CX

Detailed Description

 

Supports different encryptions: Viaccess ; Seca ; Irdeto ; Conax

Follow ISO 7816 standard,support TO ,T1 and other user define protocols

CMU with 16K/64K/128K byte flash ,at least 1K byte eeprom

 Software update by phoenix or other programmer

 Low power consumption,less than 30Am

In PCB Loop antenna or SMA antenna

Operating voltages ,3.3—5.5V

 

Working Mode

 

If insert a original smart card into smart card splitter,this smart card splitter act as a master card.otherwise it act as a

slave card

 

Master card :

_ Receive date from receiver,send data to original smart card,receive data from original smart card,send data to

receiver

_ Receive data from radio translator,send data to original smart card,receiver data from original smart card,send

data to slave card via radio translator

Slave card :

_ Receive data from receiver,send data to master card via radio translator,receiver data from master card via radio

 

translator,send data to receiver

Smart card Interface

Smart card splitter has tow smart card interfaces,one connect to host smart reader,one connect to original smart card

Smart card interface feature: Odd,Even and NULL parity

 

Radio translator

Radio translator is a low power consumption translator

_ Less than 15Am current

_ Half duplex

_ High speed ,100kbps

_ Output power :-10~ 10 dem

Update software: update connect is phoenix

 

LPT(parallel port)update fireware ,need do follow:

1. startup cardEdit

2. select flash file(firmware)

3. assigned a card ID,( a set of smartcard splitter use one card id )

4. set a freq,use 439MHz

5. select “LPT”

6. Connect smartcard splitter to PC (parallel )

7. click “ update “

8. connect another smartcard splitter to PC ,repeat step 6 and 7

Setting

1. insert original smart card into master card

2. insert master card into one receiver (STB )

3. insert slave cards into receivers

Support encryptions of Viaccess VIA , Seca MG,Irdeto IR and Conax CX TV Cardsplitter



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.